스테인리스·티타늄 파이버 레이저 색상 마킹은 산화막 두께가 수십 나노미터 단위로 갈리며 색이 바뀝니다.
이 앱은 그 색을 맞혀 주지 않습니다. 대신 계산할 수 있는 물리량을 계산해 시행착오 범위를 줄이고,
실제로 관찰한 결과를 기록으로 남깁니다.
계산
플루언스 F, 스팟 중첩 OL_x / OL_y, 누적 펄스 N, 누적 에너지(CDE)
영역 판정 — 산화 / 용융 / 어블레이션
MOPA와 Q-switched 별도 모델. Q-switched에서 펄스폭은 입력이 아니라 주파수 파생값입니다
정격 주파수 곡선으로 제한한 실효 평균출력
시편을 태우기 전에
소형 문자 판정 — 획 폭 대 스팟 지름, 획당 해칭 라인 수와 그 근거
실제 글리프 아웃라인·스캔라인 기반 문자 열분포 (온도가 아닌 상대 에너지)
갈바노 지연 시작값과 조정 방향
개당 처리 시간·축열과 권장 사이클 간격
캘리브레이션 루프
주파수 × 속도 1차 매트릭스 — 마킹 순서를 무작위화해 축열 효과를 드러냅니다
칸마다 12색 라벨·균일도 기록. 시편에는 인덱스만 마킹하고 파라미터는 CSV로 조회
유망한 칸 기준 출력 3레벨 2차 매트릭스
18% 그레이 패치 기준 촬영(선택) — CIE Lab, CIEDE2000 색차
레시피
validated 승격 조건은 서로 다른 소재 로트 2회 재현
EzCad 펜 파라미터·매트릭스 CSV 내보내기
다른 초점 거리 렌즈로 환산 (지표 보존, 재검증 필요 명시)
발진기 유형 변경 시 기존 레시피를 조용히 재해석하지 않고 무효화
안전
본 앱은 캘리브레이션 보조 도구이며 장비를 제어하지 않고, 무인 운전을 전제한 기능을 제공하지 않습니다.
1064nm 대응 보안경, 클래스 4 차폐 환경, 흄 집진은 사용자의 책임입니다.
모든 파라미터는 실제 테스트로 검증한 뒤 양산에 사용하십시오.
계산 엔진·시각화 뷰·권장값 탐색은 제한 없이 무료이며 광고가 없습니다.
무료 구간에 장비 프로파일 1개와 테스트 매트릭스 1개가 포함되어 캘리브레이션 루프를 끝까지 한 번 돌려볼 수 있습니다.
1회 결제 Pro 해제($14.99, 구독 아님)로 매트릭스 무제한·EzCad 내보내기, 셀 촬영 색상 기록, 레시피 라이브러리, 프로파일 무제한이 열립니다.
It does not predict color. It narrows the search.
In fiber laser color marking on stainless and titanium, the color turns on an oxide film only tens of
nanometers thick. This app will not guess that color for you. Instead it
computes the physics that can be computed to shrink the trial-and-error space, and
keeps a record of what you actually observed.
What it computes
Fluence F, spot overlap OL_x / OL_y, pulse count N, cumulative dose energy (CDE)
MOPA and Q-switched modeled separately. On Q-switched sources, pulse width is derived from frequency, not entered
Effective average power capped by the rated frequency curve
Before you burn a specimen
Small-character feasibility — stroke width against spot diameter, hatch lines per stroke, and the reason behind the verdict
Character heat distribution from real glyph outlines and scanlines (relative energy, not temperature)
Galvo delay starting values and an adjustment direction
Throughput, heat build-up per part, and a recommended cycle interval
The calibration loop
A primary matrix over frequency × speed, with randomized marking order so heat accumulation shows up
Record each cell with a 12-color label and uniformity. Only the index is marked on the specimen; parameters come from the CSV
A secondary matrix at three power levels around a promising cell
Optional capture against an 18% gray patch — CIE Lab and CIEDE2000 deltas
Recipes
Promotion to validated requires reproduction across two different material lots
Export EzCad pen parameters and matrix CSV
Convert to another lens focal length (metrics preserved, revalidation flagged)
Changing a source type invalidates existing recipes rather than silently reinterpreting them
Safety
This app assists calibration. It does not control equipment and provides no unattended-operation
feature. 1064 nm rated eyewear, a Class 4 shielded environment and fume extraction remain your
responsibility. Verify every parameter with an actual test before production use.
The calculation engine, the visualization views and the recommended-value search are free with no
restrictions and carry no advertising. The free tier includes one machine profile and one test matrix,
enough to run the calibration loop once end to end. A one-time Pro unlock ($14.99, not a subscription)
opens unlimited matrices with EzCad export, cell photo color records, the recipe library and unlimited profiles.